Skip to content
Free Shipping on Orders Over $250
Bulk Pricing: Save More by the Case
Free Shipping on Drug Test Kit Orders Over $250
Bulk Pricing on Drug Tests: Save More by the Case
Net Terms & PO Billing for Clinics, Labs & Agencies  ·  Apply →
ORDER TOTAL$0.00
American Screening Corporation
    Need bulk pricing?

    Get a custom quote for your clinic, lab or workplace.

    Get a Quote →

    Home / Drug Testing Guides / Need Saliva Alcohol Test Strips in Bulk?

    DRUG TESTING GUIDE · FROM THE ASC TEAM

    Need Saliva Alcohol Test Strips in Bulk?

    Need Saliva Alcohol Test Strips in Bulk?

    Quick answer: Saliva alcohol test strips are single-use oral-fluid screens that detect ethanol in saliva, typically at a 0.02 percent BAC cutoff. Results appear in minutes. Clinics, treatment programs, courts, and employers buy them in bulk for on-site screening. A positive result is preliminary; confirm by GC/MS or LC-MS/MS laboratory testing.

    • Saliva alcohol strips detect ethanol, not EtG, and stay relevant only while alcohol remains in the body, usually hours rather than days.
    • A common screening cutoff is 0.02 percent BAC (20 mg/dL), the DOT alcohol screening level in 49 CFR Part 40 as of November 2026.
    • American Screening Corp is the source for wholesale saliva alcohol strips and related oral-fluid kits, with same-day shipping nationwide from Shreveport, Louisiana.

    What do saliva alcohol test strips detect?

    A saliva alcohol test strip is a single-use oral-fluid device that indicates ethanol at or above a printed cutoff. Collectors use it to answer one question: is alcohol present in the donor now.

    The strip does not measure ethyl glucuronide (EtG). EtG is a metabolite used in urine abstinence testing and has a longer window. If a program must document drinking over several days, a saliva ethanol strip is the wrong tool.

    Programs that must document recent ethanol at a clinic door, a probation visit, or a pre-shift check are the saliva-strip use case.

    What cutoff and detection window should bulk buyers specify?

    Specify the cutoff your written policy already names, then buy the matching insert. Many professional saliva alcohol strips use 0.02 percent BAC, which equals 20 milligrams per deciliter. 49 CFR Part 40 uses 0.02 as the alcohol screening level for DOT-regulated tests as of November 2026 (eCFR, Procedures for Transportation Workplace Drug and Alcohol Testing Programs).

    Ethanol in saliva tracks blood alcohol. NIAAA (Alcohol Metabolism, as of November 2026) describes average elimination of about 0.015 grams per deciliter per hour. A donor just above 0.02 percent can fall below cutoff within about an hour after drinking stops. A much higher BAC remains detectable longer. Treat the window as hours, not days, and never as a guaranteed clock.

    Every positive screen is preliminary; confirm by GC/MS or LC-MS/MS laboratory testing.

    How do saliva alcohol test strips work?

    The donor wets a pad or deposits saliva in a well. A reagent reacts with ethanol and changes color. Staff compare the pad with the chart at the labeled read time.

    Most inserts call for a read in about two minutes and forbid late reads. Mouthwash, food, drink, and smoke can contaminate oral fluid, so inserts typically require 10 to 15 minutes with nothing in the mouth. Log the lot, expiration, start time, read time, and result.

    Who should buy saliva alcohol test strips in bulk?

    Bulk quantities fit organizations that screen many people on site and want a disposable ethanol check without an instrument. Buyers include addiction-treatment and MAT clinics, probation and court programs, hospital intake, staffing firms, and non-DOT employers in construction and safety-sensitive work.

    If the same visit also requires a urine drug panel, add drug test cups so collectors keep one workflow. Follow state statute before screening minors.

    Size the order to throughput, shelf life, and confirmation capacity. American Screening Corp quotes wholesale and private-label volumes from Shreveport, Louisiana, and ships same-day nationwide.

    Are bulk saliva alcohol strips FDA-cleared, CLIA-waived, or DOT-ready?

    Verify status on the exact SKU and label. Do not infer clearance from a catalog heading.

    FDA: some saliva alcohol screens are legally marketed as in-vitro diagnostics or alcohol screening devices. Read the intended-use line. If a lot is labeled forensic use only, do not use it for clinical diagnostic testing.

    CLIA: testing human specimens in a clinic generally requires a CLIA certificate. A device is CLIA-waived only when FDA assigns that categorization (FDA, Clinical Laboratory Improvement Amendments, as of November 2026). If the pouch does not say CLIA-waived, do not treat it as waived.

    DOT: 49 CFR Part 40 allows a saliva or breath alcohol screening device only when that model is on the NHTSA Conforming Products List. A bulk strip that is not listed is not a DOT alcohol test. DOT confirmation uses an evidential breath testing device. Non-DOT clinic, court, and employer policies may still use labeled saliva strips as preliminary screens.

    How do saliva alcohol strips compare with EtG and breath tests?

    A saliva alcohol strip does the on-site ethanol check a collector needs. An evidential breath test does everything that strip does plus a quantified result accepted under 49 CFR Part 40 when the device is listed.

    Saliva alcohol strips compared with urine EtG and evidential breath testing for program design.
    Method What it detects Typical cutoff Detection window Best fit
    Saliva alcohol strip Ethanol in oral fluid 0.02% BAC (20 mg/dL) Hours, while ethanol is present On-site recent-use screen
    Urine EtG Ethyl glucuronide Laboratory cutoff in ng/mL Longer than ethanol; lab-defined Abstinence monitoring
    Evidential breath test Ethanol in breath 0.02 screen; 0.020 confirm (DOT) Hours, while ethanol is present DOT testing and confirmation

    How do you run a saliva alcohol screen?

    1. Confirm the device is in date, sealed, and stored as the insert requires.
    2. Identify the donor and wait the insert's empty-mouth interval, often 10 to 15 minutes.
    3. Collect saliva exactly as pictured on the pouch. Do not add extra sample or reuse a strip.
    4. Start the timer. Read only inside the labeled window, commonly about two minutes.
    5. Compare the pad with the color chart. Record lot, times, and result.
    6. Treat any positive as preliminary; confirm by GC/MS or LC-MS/MS laboratory testing or by evidential breath testing when the policy requires it.

    What should bulk buyers check before ordering?

    • Match the strip cutoff to the written policy (usually 0.02 percent BAC).
    • Decide ethanol (recent use) versus EtG (longer abstinence) before you order.
    • Copy FDA, CLIA-waived, forensic-use, and NHTSA-CPL status from the actual label.
    • Set a confirmation path: GC/MS, LC-MS/MS, or evidential breath.
    • Train collectors on empty-mouth time, read time, and late-read rules.
    • Store sealed at labeled temperature and rotate lots.
    • Pair alcohol screens with urine panels when the program tests both.
    • Contact American Screening Corp for wholesale case quantities and private label.

    How to order bulk saliva alcohol test strips

    American Screening Corp, based in Shreveport, Louisiana, supplies wholesale drug and alcohol testing products to clinics, hospitals, treatment centers, courts, labs, staffing firms, and employers. Ask for current saliva alcohol strip packs, companion oral-fluid drug tests, and same-day shipping options.

    Reviewed by American Screening Corp product staff. Last updated November 2026.

    Sources

    FAQ

    What cutoff do saliva alcohol test strips use?

    Many professional strips use 0.02 percent BAC (20 mg/dL), the DOT screening level in 49 CFR Part 40 as of November 2026. Always follow the cutoff printed on the insert for the lot you received.

    How long after drinking will a saliva alcohol strip stay positive?

    Ethanol remains in saliva while it remains in blood, typically hours. NIAAA describes average metabolism of about 0.015 g/dL per hour. Saliva ethanol strips are not multi-day EtG tests.

    Can bulk saliva alcohol strips be used for DOT testing?

    Only if the exact model is on the NHTSA Conforming Products List and used under 49 CFR Part 40. Many bulk strips are for non-DOT clinic, court, or employer screens. Confirm the model before you write it into a DOT policy.

    What should staff do with a positive saliva alcohol result?

    Treat it as preliminary. Confirm by GC/MS or LC-MS/MS laboratory testing, or by evidential breath testing when the program requires it. Document the collection. This is not a medical diagnosis.

    This is general information, not legal or medical advice.

    ← Back to all articles

    More from the blog

    Need testing supplies for your program?

    Explore urine drug test cups, oral fluid tests and collection supplies, or talk with our team about case pricing for your organization.

    Shop drug tests →Request a bulk quote →

    ▥   Volume PricingSelect your order quantity

    Unit Price:

    Total:

    Quantities are individual tests, sold in full cases. Prices are per test.

    Get a Quote